氮肥施用对直播冬油菜产量及氮肥利用率的影响

为探明安徽省直播冬油菜种植中适宜的氮肥用量、氮肥种类和施氮方式，通过田间小区试验，研究尿素不同用量及等氮量尿素和控释尿素不同施用方式对直播冬油菜产量、氮肥累积量及氮肥利用率的影响。结果表明：施氮水平和施氮方式对直播冬油菜产量具有显著影响，成株率与产量之间呈显著正相关，施氮量180 kg N·hm^-2条件下，尿素分次施用处理（N180）和控释尿素一次性施用处理（CRU180）在生育中后期能有效提高直播冬油菜密度。施氮量240 kg N·hm^-2、尿素分次施用处理（N240）角壳和茎秆氮素累积量分配比例增加，籽粒分配比例减少，氮肥表观利用率、氮肥农学效率、氮肥生理效率和氮肥偏生产力显著降低，籽粒产量不增反降，较CRU180和N180分别降低2.87%和9.67%。各施氮处理中，N180处理产量最高，较其他施氮处理显著增产7.53%~82.15%。施氮量180 kg N·hm^-2条件下，相比尿素一次性施用处理（U180），CRU180和N180显著增产8.53%和16.69%，籽粒氮素累积量显著增加8.80%和16.02%，氮肥表观利用率显著增加11.68%和14.30%，氮素农学效率显著增加12.53%和24.46%，氮素生理效率增加0.74%和9.13%，氮肥偏生产力显著增加8.59%和16.76%。综合本试验直播冬油菜产量、氮素累积量和氮肥利用率结果来看，合理的氮肥用量和氮肥品种可以有效增加直播冬油菜的成株率和氮素累积量，进而增加产量、提高氮肥利用率。安徽省直播冬油菜施氮量180 kg N·hm^-2，尿素分次施用和控释尿素一次性施用，均能达到产量和氮肥利用率的双向提升。考虑到直播冬油菜轻简化发展大趋势，建议采用控释尿素一次性基施。     

丹江口水源涵养区绿色高效农业技术创新集成与示范——模式设计、技术集成与机制创新

2017年5月，中国农业科学院科技创新工程协同创新任务“丹江口水源涵养区绿色高效农业技术创新集成与示范”正式启动。项目在农业绿色高效生产、种养耦合、生态循环、面源污染控制、多功能田园生态系统构建等方面开展协同创新。按照单一技术规范化、复合技术集成化、体系技术系统化的思路，任务创新集成水源涵养区生物多样性利用与农业种植结构调整、主要农产品全产业链绿色高效生产、种养循环新模式、生态型高效设施农业、农村生活污染物控制等环节的十大关键技术，总结形成一套水源涵养区绿色高效农业全域综合性的技术解决方案，可为其他同类地区提供可复制、可推广的经验、模式和示范样板，为保障南水北调水质安全，推动水源涵养区农业绿色发展、农民增收及区域脱贫攻坚提供有效的科技支撑。     

玉米宽窄行种植技术推广模式研究

玉米宽窄行种植技术在实际应用过程中，不仅可以实现对原有技术的创新和优化，还可以 保证玉米种植的质量、产量和销量。本文针对玉米宽窄行种植技术的推广模式进行分析和研究，为当 地农业可持续发展打下良好基础。     

发酵全混合日粮对肉羊消化吸收功能和生长性能的影响研究

旨在探讨添加混合微生物菌剂的发酵全混合日粮(Fermented total mixed ration，FTMR)对肉羊营养物质消化吸收功能和生长性能的影响。通过发酵和肉羊饲喂试验，测定了FTMR的品质变化、营养物质表观消化率、肉羊瘤胃发酵情况及日增重。结果表明:1)全混合日粮发酵后pH和中性洗涤纤维含量显著降低，乳酸和乙酸含量显著增加(P<0.05)；2)试验组肉羊瘤胃液pH显著降低，氨态氮含量降低50%以上(P<0.05)；粗蛋白质、粗脂肪、中性洗涤纤维、酸性洗涤纤维和酸性洗涤木质素(ADL)的利用率均显著高于对照组(P<0.05)，尤其是ADL利用率提高了29.92%(P<0.05)。3)试验组平均日增重较对照组提高50%。综上，混合微生物菌剂加入全混合日粮发酵后，适口性增强，可改善肉羊瘤胃液环境，提高肉羊的消化吸收功能和生长性能，有利于提高秸秆饲料化利用效率。     

混合所有制二级学院教工党员先锋作用发挥途径的探索与实践——以朋朋宠物科技学院为例

在混合所有制二级学院办学体制机制下,教工党员先锋作用的发挥对改革至关重要。本文以朋朋宠物科技学院为例,从教工党员先锋作用发挥的模式创建、具体途径和举措、改革的成效等方面,进行了全面的论述。     

Role of basidiomycete fungi in the grapevine trunk disease esca

Phaeomoniella chlamydospora and wood-rotting basidiomycete fungi, namely Fomitiporia spp., are known esca pathogens. However, the effect of their mixed infections and the sequence of infection on disease development is unclear. To determine the effects of single and co-inoculations on symptoms, potted Vitis vinifera ‘Crimson Seedless’ was inoculated with P. chlamydospora either alone or in combination with one of four basidiomycetes: Coprinellus radians, Fomitiporia langloisii, F. polymorpha and the novel species Tropicoporus texanus. Basidiomycetes were isolated from vines with foliar symptoms of esca in California and Texas. In sequential co-inoculations, the effects of different sequences of infection (P. chlamydospora first, basidiomycete 6 months later; and vice versa) were tested, compared to simultaneous co-inoculations. Plants inoculated with P. chlamydospora either alone or in combination with a basidiomycete (in any sequence) did not differ significantly in the length of black-streaking lesions. In plants inoculated only with a basidiomycete, the appearance of large brown lesions, coupled with the absence of this wood symptom from control plants, suggests that C. radians, F. langloisii and T. texanus are pathogenic. Foliar symptoms resembling those of esca in the field (marginal and/or interveinal scorching, combined with red and/or yellow discoloration) were statistically more frequent among plants inoculated with F. polymorpha or T. texanus, either simultaneously or following P. chlamydospora, compared to single inoculations. Sequential co-inoculations of a basidiomycete before or after P. chlamydospora were associated with similar lesion lengths, suggesting that basidiomycetes may not require infection by P. chlamydospora in order to extensively colonize the wood.     

立体绿化集成技术配套产品开发利用研究进展

当前立体绿化在国内多个大中城市中得到了蓬勃发展,促进了相关配套产品的研发和推广应用,同时新型的配套产品又推动了立体绿化的快速发展。本文对华南地区立体绿化基质产品、蓄水种植容器、植被毯、绿墙、生态植被砖等相关配套产品的研发及应用情况展开综述,旨在为今后能更有效地推广立体绿化集成技术及相关产品提供参考。     

Dissolved oxygen controls summer habitat of Clear Lake Hitch (Lavinia exilicauda chi), an imperilled potamodromous cyprinid

Clear Lake Hitch is an imperilled minnow endemic to Clear Lake, Lake County, California, United States listed as threatened under the California Endangered Species Act (ESA) and a candidate for listing under the United States ESA. It exhibits a potamodromous life cycle whereby adults, which reach up to 6 + years in age and over 350 mm in length, migrate into Clear Lake's ephemeral tributaries briefly during spring to spawn. Conservation and management of Clear Lake Hitch is inhibited, in part, by a lack of information on the lacustrine habitat of nonbreeding individuals within Clear Lake. To address this problem, we sampled Clear Lake Hitch with gill nets in a stratified random sampling design to determine the distribution and habitat associations in early summer 2017 and 2018. We identified abundance-habitat relationships for juveniles and adults using Bayesian zero-inflated negative binomial generalised linear mixed modelling. Results indicated that dissolved oxygen concentration was the most important habitat feature measured; juveniles and adults were substantially more abundant in normoxic (≥2 mg/l) than in hypoxic (<2 mg/l) habitat. Both also exhibited weak positive relationships with chlorophyll fluorescence, suggesting relatively productive habitats may support higher numbers of Clear Lake Hitch. Spatially, juveniles were most abundant in nearshore habitats while adults were ubiquitous, indicating an ontogenetic habitat expansion that may be associated with a resource availability-predation risk trade-off. Management actions undertaken to improve hypoxia problems in Clear Lake would also improve Clear Lake Hitch habitat.     

江汉平原植棉区春玉米与短季棉套作的种植表现

为探索适宜江汉平原植棉区监利县旱地作物高产高效种植模式,开展了春玉米与短季棉套种模式示范试验。结果表明:春玉米与短季棉套种模式达到了玉米和棉花双丰收的高产效果,经济收益为33000元/hm^2左右,明显高于玉米和棉花的单作收益,是旱地作物结构调整的较好模式。     

油菜覆膜打孔穴播机打孔装置设计与试验

为实现油菜等小粒径作物覆膜种植中膜上均匀打孔的功能,针对传统膜上成穴装置结构庞大复杂、工作时易黏土挑种及撕挑地膜等问题,设计了一种法兰式滚轮与螺纹式圆锥型锥钉组合式结构的打孔装置,确定了其主要结构参数范围;构建了打孔装置运动学模型,分析了打孔锥钉关键点的运动轨迹,确定了膜上打孔过程,并基于轨迹方程分析了膜孔尺寸参数;运用ADAMS运动学仿真,采用四因素三水平正交试验方法,以打孔锥钉顶角、打孔锥钉直径、打孔滚轮半径、机组前进速度为试验因素,以膜孔长度、膜孔间距偏差为试验考核指标,进行了打孔装置结构和运动参数的仿真试验。仿真结果表明:影响膜孔长度的因素主次顺序为打孔滚轮半径、打孔锥钉顶角、打孔锥钉直径、机组前进速度;影响膜孔间距偏差的因素主次顺序为打孔滚轮半径、机组前进速度、打孔锥钉顶角、打孔锥钉直径;基于参数优化,获得较优参数组合为:打孔锥钉顶角53°、打孔锥钉直径16 mm、打孔滚轮半径65 mm、机组前进速度4 km/h。以打孔装置较优结构参数组合进行了田间验证试验,结果表明:打孔装置所打膜孔形状较规则,普遍呈类圆形状,膜孔长度均在18 mm以上,膜孔间距较为均匀,与仿真结果基本一致;各行膜孔长度一致性变异系数为4.98%,各行膜孔间距均匀性变异系数为3.44%。结果表明试验参数组合选取合理,打孔装置符合设计要求。